Vertical form fill seal (VFFS) for snacks: Features

BAGMAKER MOTION TYPE

• Continuous motion vertical form fill and seal machine for the handling of heat sealable packaging materials and light laminates from flat film web.

FEATURES INCLUDED

• Omron Servo driven cross sealing jaws for up/down, jaw closing motion, film drive transport belts and back sealing station (various available to suit film type)
• All operational parameters such as bag length, sealing time and speed are fully programmable and stored in the 100 program Omron PLC.
• Manual film tracking adjustment.
• Stacking light (3-coloured)
• Registration mark sensor / path adjustment
• Jaw jam detection (encoder type) / pisd
• Safety Air Dump Valve cat 3
• Electrical panels with key locks
• Machine interior lighting
• Photocell unit for print mark detection.
• Clever cross jaw product in seal detection
• Chain bag
• Fixed product discharge chute,
• Pneumatic valves: Festo
• Cross seal width: 10 mm, Vertical seal width 10mm
• Rotary back seal band
• Machine Frame designed to integrate a Multiheadweigher.
• Lock out tag out machine isolation.
• CE certified
• Machine specification options for selection
• Dial adjustment for registration mark sensor positioning – Registration mark sensor mounted on screw thread with dial and adjustment handle.

FORMING TUBE

• Full tube formers set’s

NITROGEN FLUSHING

METAL DETECTOR

• Safeline signature model with two off flexible transfer chutes
• Throughput aperture: 175mm. White paint finish
• Sensitivity. Fe 1.2 Non-Fe 1.5 SS 1.8
• 1 Flexible PolyEurothene Metal Detector chute for contoured product transition on small bags
• Swinging mounting arm for Metal detector
• Integrated between Bagmaker and Scale to hold the metal detector securely in place Includes a swinging arm for ease of chute removal.

PRINTER MOUNTING BRACKET

• Printer bracket with dial readout
• Suspension for printing unit with adjustable film wrap around roller and dial adjustment positioning.

PRINTER

• Markem X45
• Printhead width: 53 mm
• Print speed: Continuous: 30 to 600 mm/s
• Print area:
• – Continuous: 32 mm or 53 mm x 250 mm
• Print features:
• – Automatic printhead setup
• – Detect: Dead-dot detection. Quick change printhead
• – Intermittent or continuous printing
• – Easily change from left to right hand with no additional parts
• – Gap between prints: 0.5 mm
• – Automatic shift codes and serial numbers
• – Multiple variable user input

TAKE OUT CONVEYOR

• Takeaway Conveyor inclined
• Inclined takeaway conveyor with fixed tunnel guard powered from the bagmaker.

BASIC OPTION

• Gusset system above and below the jaw to create dual side gusset bag.
• Static reduction system for high dust application
• Former Dust extraction system inner tube and vacuum
• Splicing table with automatic film clamping feature – Splicing table at the rear of the machine that automatically clamps the film if the film real ends.
• Chain bag feature – Selectable Chain of bags that are sealed but not cut. Perforated or non-perforated options available

MODBUS

• Modbus communication for the complete system
• Communication to bagmaker and weigher so production data can be collected via a Modbus network.
• With Modbus suitably connected to the internet, it allows you to carry out a first phase of remote assistance, but this service is only for breakdowns, under fees, and does not replace the start-up.

MULTI HEADS FOR SNACKS – WEIGHER

• Yamato Dataweigh ADW 314 S Multihead Weigher (MHW)
• Number weigh buckets: Weighing range: 8 – 1.000 g
• target volume: 3.000 cc in single dump
• product piece length: 80 mm
• Electrical protection: IP 54
• Material: All parts in contact with the product: stainless steel SUS 304 (1.4301), plain plate
• Machine frame: painted steel (clear white).
• Control unit: RCU 920, color touch screen.
• Model including: Infeed funnel, Infeed ring with individual fingers, 15° single top cone, single opening feed and weigh buckets ,60° upper chutes and funnel and clear polycarbonate parabolic funnel.